WT-5800 UHF Wireless Tuner




ส่วนลดเยอะ!! โปรดสอบถาม ID Line : polpat.bell 

WT-5800   UHF Wireless Tuner

The wireless tuner WT-5800 is a PLL-synthesizer controlled double superheterodyne true diversity tuner to be used in UHF wireless systems. It employs a compander noise reduction circuit to minimize the influence of the ambient RF noise.

Power Source AC mains (supplied AC adapter must be used)

Power Consumption 250 mA (12 V DC)

Receiving Frequency 576 – 865 MHz (*2), UHF

Channel Selectable 64 selectable frequencies

Receiving System Double super-heterodyne

Diversity System Space diversity (true diversity)

Mixing Output MIC/LINE (selectable): -60 dB (*1) (MIC)/-20 dB (*1) (LINE), 600 Ω

phone jack (unbalanced), 600 Ω XLR-3-32 type connector (balanced)

Mixing Input -20 dB (*1), 10 kΩ, unbalanced, phone jack

Antenna Input 75 Ω, BNC (phantom powering for antenna), 9 V DC, 30 mA (max)

Antenna Output 75 Ω, BNC (Gain 0 dB)

Receiving Sensitivity 90 dB or more, Signal to Noise ratio (20 dBμV input, 40 kHz deviation)

Squelch Sensitivity 16 – 40 dBμV variable

Squelch System Using together of noise SQ, carrier SQ and tone SQ

Tone Frequency 32.768 kHz

Indicator Audio (6 step), RF (6 step), ANT A/B, Audio (peak), Battery alarm

Channel Check Usable frequencies scanning

Signal to Noise Ratio 110 dB or more (A-weight, unbalanced output)

Harmonic Distortion 1 % or less (typical)

Frequency Response 100 Hz – 15 kHz, ±3 dB

Operating Temperature -10 ℃ to +50 ℃ (14 F to 122 F)

Operating Humidity 30 % to 85 %RH

Finish Resin, black

Dimensions 210 (W) × 44 (H) × 205.1 (D) mm (8.27″ × 1.73″ × 8.07″)

Weight 700 g (1.54 lb)

Accessory AC adapter (*3)…1, Whip antenna…2, Rubber foot…4

Option Mounting bracket kit: MB-WT3 (for rack mounting one WT-5800 unit)

MB-WT4 (for rack mounting two WT-5800 units)




เฉพาะลูกค้าที่เข้าสู่ระบบ และเคยซื้อสินค้าชิ้นนี้แล้วเท่านั้น ที่เขียนบทวิจารณ์ได้